Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Reseda?
In Reseda, a standard chimney sweep and safety inspection runs $150 to $290, while common fireplace repairs like a new cap or a cracked firebox panel fall between $250 and $850. Full chimney relining, the biggest-ticket job we do, typically runs $2,400 to $5,800 depending on liner length and material. The exact number comes down to what your flue is actually doing once we get a camera inside it, and we give free estimates at (866) 562-0968.
That spread might feel wide, but it’s honest. A house off Tampa Avenue built in the 1950s with a masonry chimney and a decades-old clay liner is a different job from a 1990s tract home near Reseda Park with a factory-built insert. We diagnose first, match the repair to the failure, then price it. No guessing.
Fireplace Services Cost Breakdown (2026)
Here’s what the individual pieces of work actually cost in the Reseda market this year. These are installed prices, not just parts.
| Service | Typical Cost Range | Notes |
| - | - | - |
| Chimney sweep (level 1 inspection included) | $150 – $290 | Standard annual cleaning for a wood-burning fireplace |
| Level 2 video inspection | $220 – $450 | Camera scope of the flue; recommended when you’ve bought a home or had a chimney fire |
| Chimney cap and cover (Gelco or Famco) | $250 – $650 | Multi-flue caps cost more; stainless steel lasts longer than painted steel |
| Crown repair or rebuild | $450 – $1,200 | Cracked crowns let water in; resealing costs less than a full pour |
| Firebox repointing or repair | $600 – $1,800 | HeatShield resurfacing or mortar work on the firebox walls |
| Smoke chamber parging (HeatShield) | $700 – $1,600 | Smoothing the smoke shelf to fix drafting and reduce creosote hang-up |
| Chimney relining (DuraFlex flexible liner) | $2,400 – $5,800 | Price depends on flue height, liner diameter, and whether insulation is added |
| Dryer vent cleaning | $125 – $225 | Often bundled with a sweep for one trip |
| Masonry tuckpointing (per area) | $350 – $900 | Repointing spalled brick joints above the roofline |
The single biggest cost driver is relining, and that’s where materials matter most. A DuraFlex flexible liner sized for your flue costs more than an off-the-shelf generic liner, but it’s rated for the temperatures a wood fire actually produces and it’s code-compliant for a masonry chimney. When we quote a reline, you’re paying for a certified system, not a cost-cut substitute that fails in a few years. We’ll show you the liner going in.
A few less obvious things push cost up. Chimney height matters: the taller the flue, the more liner you pay for. A flue that’s out of square or partially collapsed means more prep before the new liner goes in. And if your firebox or smoke chamber is failing, that has to be fixed before the liner, which is why we often quote HeatShield resurfacing alongside relining rather than as a separate later job.
What Affects Fireplace Services Pricing in Reseda
Several local and structural factors move the number more than most homeowners expect:
- Chimney age and the neighborhood’s housing stock. A lot of Reseda homes were built between the late 1940s and the 1970s, and many still have their original clay flue tiles. Those tiles crack from decades of heating and cooling. When we find a cracked tile, the fix is usually a liner, not a patch, and that’s the job that swings the price most.
- Whether you have a masonry chimney or a factory-built fireplace. Masonry chimneys take a flexible liner and sometimes resurfacing; factory-built units need a liner matched to the manufacturer’s spec. The two take different products, so the labor and materials differ.
- The condition found during inspection. A sweep on a clean, well-maintained flue is quick. A flue packed with glazed creosote, or one with a damaged crown and water-damaged firebox, needs more time and more parts. We don’t price the easy version and surprise you later. We tell you what we find and quote from there.
- Access and roofline. Steep pitches, low-clearance roof areas, and chimneys set against a second story all add setup time and safety rigging. A straightforward gable-end chimney is faster work.
- Materials and brand. Gelco and Famco caps, HeatShield smoke chamber products, and DuraFlex liners cost more than generic hardware-store substitutes but hold up under real fire conditions. That’s a deliberate trade you’re making: fewer repeat visits, longer service life.
- Bundling sweep, repair, and dryer vent in one visit. One trip for all three is cheaper than three separate appointments, and it addresses the two leading venting fire hazards in the home at once.
If any of this is starting to sound like your situation, the Fireplace Services in Reseda page lays out how we handle sweeps, repairs, and relining as one coordinated visit.
How to Save on Fireplace Services
You can’t avoid every repair, but you can keep a small problem from turning into a liner replacement. A few practical moves:
- Sweep every year you burn wood. One $150 to $290 sweep catches cracked tiles, a failing crown, and creosote buildup early. Waiting lets creosote glaze onto the flue and lets water get into the masonry, and both push you toward a $2,400-plus relining.
- Keep water off the chimney. A properly fitted Gelco or Famco cap and a sealed crown are the cheapest protection you can buy. Water intrusion is the number one killer of Reseda masonry chimneys, and a cracked crown that costs a few hundred to reseal will eventually cost a few thousand if it’s ignored.
- Bundle services into one visit. Having the dryer vent cleaned during the same appointment as your chimney sweep saves the cost of a second trip and keeps both major venting hazards in check.
- Fix the smoke chamber before you reline, not after. A rough smoke chamber causes the drafting problems that make people think they need a new fireplace. HeatShield resurfacing smooths it and can save you from a bigger rebuild.
- Ask for a written scope with brand names. Knowing you’re getting a DuraFlex liner and HeatShield resurfacing, not a generic substitute, lets you compare quotes fairly instead of chasing a low bid that hides cheaper materials.
We don’t do “affordable” pricing as a slogan, because it usually means generic parts. What we do is explain exactly what your chimney needs, what material goes into it, and why. Free estimates make that easy to start: call (866) 562-0968.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Reseda?
A chimney sweep in Reseda typically costs $150 to $290 and includes a basic safety inspection. If we spot cracked flue tiles or heavy creosote during the sweep, we’ll recommend a camera inspection before quoting any repair. Call (866) 562-0968 and we’ll get you a firm number.
Why is chimney relining so expensive?
Chimney relining in Reseda runs $2,400 to $5,800 because it’s a full system install: a correctly sized DuraFlex flexible liner, insulation where needed, and the labor and safety work to run it the length of the flue. It’s the permanent, code-compliant fix for a failed flue. Call (866) 562-0968 for an estimate specific to your chimney height and liner size.
How much does it cost to repair a cracked firebox or chimney crown?
Firebox repair runs $600 to $1,800 and a crown repair or rebuild runs $450 to $1,200. Crown damage is usually water-related and worsens through the rainy season, so it’s worth addressing before winter. Estimates are free: call (866) 562-0968.
Is it cheaper to repair my chimney or rebuild it?
Repair is almost always cheaper than a full rebuild. Relining with DuraFlex or resurfacing the firebox and smoke chamber with HeatShield typically costs a fraction of tearing down and rebuilding masonry, and it solves most flue and drafting failures. A rebuild only becomes the answer when structural masonry has failed. Call (866) 562-0968 and we’ll tell you honestly which side of that line you’re on.
Can I get the sweep, repair, and dryer vent cleaning done in one visit?
Yes, and it’s usually cheaper that way. Booking the chimney sweep, any repair work, and dryer vent cleaning together means one appointment and one trip for the two leading residential venting fire hazards. Call (866) 562-0968 to schedule everything at once.
Getting a Straight Answer on Cost
Pricing a fireplace job without looking inside the flue is guesswork, and we don’t do guesswork. We open up the chimney, show you what we find, and quote the repair that matches the actual failure: HeatShield where resurfacing solves it, a DuraFlex liner where relining is the right call, and Gelco or Famco caps to keep water and animals out. All of it comes from a professional-grade supply chain (Olympia Chimney and Copperfield among them), not whatever’s on the shelf at the hardware store. If you want to see how we handle the whole picture, start at our home page, or call us directly for a free estimate.
Pricing reflects the Reseda market as of 2026. Chimney Sweep Reseda offers free estimates – call (866) 562-0968.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Kristen Gallagher"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Hector Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Kelly Sutton